Pricing

Download our latest price lists for EA and Acoustic Image Amplification

Amp heads

Focus

Clarus 1

Clarus 2R

Bass and instrument combos

AI Classics

Additional information

Product comparison

Testimonials

< Acoustic Image Home

Clarus 2R Integrated Power Amplifier

The Clarus 2R (Model 403 IA) is a compact and powerful integrated amplifier for acoustic and electric instruments. Combining a two channel preamp, a digital reverb and an internal 300 watt switch mode amplifier in a compact 6.5 pound package, the C2R provides transparent, powerful and accurate sound reproduction across the full frequency spectrum so that your sound comes through.

Never before has so much power, flexibility and sonic performance been packed into such a compact and portable amplifier system. When combined with a high quality speaker system, the C2R facilitates the ultimate in sound reproduction--we call it "musical amplification." All this in a package that is so small and lightweight that it is dwarfed by amplifiers of comparable features and output.

Despite its reasonable cost, the C2R doesn't skimp on features. A sophisticated 2 channel preamp section provides mic and instrument inputs, 4-band EQ for each channel, a selectable notch or high pass filter, effects looping and a balanced direct out. An 8 preset digital reverb lets you enhance your sound as you see fit. A cutting edge switch mode power amp section drives loads as low as 2 ohms. Together, these features represent an unparalled combination of finesse, brawn and natural sound in a book-sized package

Features

Extented Frequency Range, High Fidelity Sound
Compact Enclosure (10x9x2.5 inches)
Light Weight (6.5 pounds)
Integrated Preamp, Digital Reverb and Power Amp
Two-channel preamp--Mic and Instrument
Phantom Power for Mic or Outboard Preamp
Four-band EQ for Each Channel
High Impedance/Low Impedance Instrument Inputs
Input and Master Level Controls
Effects Loop in Each Channel
Level Control on Effects Return
Switchable Notch/High Pass Filter
Balanced Direct Out via XLR Connector
Ground Lift Switch on Direct Out
Digital Reverb with 8 Presets and Level Control
300 Watt Switch Mode Power Amplifier
Switchable Dual Voltage Operation (115/230V)
Dual Speaker Outputs via Neutrik Speakon Connectors
Detachable AC Power Cord
Durable Powder-coated Enclosure
Comes with Padded Case, 6 Foot Speaker Cable

Clarus Technical Specifications:
System Freq. Resp. Distortion Hum and Noise AC Power Size Weight	20 Hz - 20 kHz, ± 0.5 dB <0.5% full output, <0.01% typical -85 dB or better 115V/60Hz, 230/50Hz, switchable 10 x 9 x 2.5 inches 6.5 pounds
Preamp Mic Input Phantom Power Instrument Inputs Direct Out Effects Loop Bass Control Mid Control Treble Control Brite Control Notch Filter High Pass Filter	600 ohm balanced, XLR connector 38 volts, on/off switch Low impedance (1 M.), High Impedance (10 M.), separately buffered +4 dB, balanced, XLR connector, ground lift Parallel type, 1/4 in jack w/ return level control Shelving type, ±15 dB @ 60 Hz ±15 dB @ 650 kHz Shelving type, ±15 dB @ 10 kHz ±15 dB @ 9 kHz -12 dB sweepable from 30 to 700 Hz -12 dB/octave sweepable from 30 to 700 Hz
Reverb Type Reverb Presets	Digital, 8 presets and level control 2 Hall (Concert Hall, Arena), 3 Room (Club, Chamber, Garage), 2 Plate (Plate, Vocal) and 1 Spring
Power Amp Topology Switching Frequency Output Power Minimum Load Output Connectors	Class D, (PWM) 300 kHz >120 Watts (8ohm), >200 Watts (4ohm), >300 Watts (2ohm) 2 ohm 2 parallel Neutrik Speakon type
Pricing UK RRP: £879.00 Contact us for latest pricing and availablity details